Welcome to Sounds Heavenly!

Products for Bang and Olufsen Systems

Sounds Heavenly are pleased to offer you a wide range of cables and accessories to complement your Bang and Olufsen audio system. All of our products are designed and tested by the company founder, a graduate Electronics Engineer with over 20 years' experience of professional and high-end domestic audio systems. Sounds Heavenly are proud to offer FREE Worldwide shipping on all of our cables! Please feel free to email us with any enquiries!

Beogram Turntable to Pre-Amp/Amplifier Cable

This product is a high quality, audiophile convertor cable to allow you to connect a B&O Beogram Turntable into your non-B&O hifi system using the "Phono" sockets, where the Turntable has the standard B&O 5pin or 7pin DIN plug on a fitted cable (NOT suitable for Beogram 8000 or other turntables without a fitted cable - please use our RCA to B&O Cable for these turntables). This cable uses premium quality, gold-plated RCA plugs and will fit almost all audio systems and phono pre-amplifiers with RCA input sockets. Please note that some Beogram turntables have built-in pre-amplifiers and so these should be connected to a line level input on your amplifier. You can also use this cable to connect a Beogram turntable with built-in pre-amplifier to the RCA type Aux input sockets on a BeoCenter 2 or BeoSound 4 audio system. For a full list of which turntables have pre-amplifiers built in, please check out our FAQ Page - if you are in any doubt, please ask!

High quality, premium branded, metal-cased plugs are used on our cables in preference to the cheap plastic plugs that you will see on many other companies' cables. Our metal cased plugs give better protection against induced electrical noise, which can degrade the sound quality produced. They are also far more rugged, to give you years of listening pleasure. We also use premium quality, gold-plated RCA plugs on our cables (as indicated by "Gold RCA" in the description), for the ultimate in quality sound reproduction! As Beogram turntables are earthed via the audio ground, no external earth wire is needed. This cable contains internal grounding links as standard to prevent spurious noise caused by earthing issues and this is suitable for most amplifiers. However, if your amplifier has a separate grounding point which requires an external ground wire, please select this option using the menu on the left.

Slimline, audiophile-quality Pure-Crystal Oxygen-Free Copper screened cabling is used in our cables, to ensure unrivalled sound quality, to prevent interference and to allow you to easily hide wiring when planning your equipment installation. This also reduces cross-talk and impedance to give a clearer, cleaner sound. The cable is finished in a dark Royal Blue colour (1m length) and Grey or Black colour (longer lengths).

Cable specifications:-

  • * Twin Screened Pure-Crystal Oxygen-Free Copper cable with Royal Blue sheath (1m length) and Grey or Black sheath (longer lengths)
  • * Signal conductors (x 2): 7 x 0.2mm PC-OFC copper
  • * Screening conductors (x 2): 16 x 0.12mm PC-OFC copper
  • * CPC or Deltron metal-bodied 7-pin female DIN line socket
  • * 2 x 24 carat Gold-Plated metal-bodied RCA plugs
  • * Internal ground link within DIN plug or optional external ground wire

    Please note: Very few other companies' cables use branded cable and plugs. Even fewer use Oxygen-Free Copper for optimum signal quality. If other companies' listings don't state these specifications, then their cables usually don't come anywhere near our quality! If you've invested in a good quality audio system, then you need good cables to get the best from it. All cables are designed and tested by a Graduate Electronics Engineer with over 20 years experience of B&O equipment.

    •