Pair of Speaker Cables for Beovox 2500 Cube Tweeters
This product is a set of two audio cables to allow you to restore a pair of classic Beovox 2500 Cube Tweeters and connect them into your Bang and Olufsen hifi system using the 2-pin DIN speaker sockets. You will need to disassemble the Tweeters to fit the cables, as the cables have to be fed through the stand of the Beovox 2500. These cables are designed to fit through the 2.5mm x 4.3mm gap inside the stand, as they measure 2.16mm x 4.22mm (outside dimensions). They have bare wire ends to connect to the Beovox 2500 and these are stripped and tinned ready to solder inside the speakers. These cables use slim-line 7-strand speaker wire and factory-fitted DIN plugs and will fit almost all B&O audio systems manufactured up to 1990 - if you are in any doubt, please ask!
Slim-line speaker cabling with a figure-eight profile and a grey outer sheath is used in our cables, to allow you to easily hide wiring when planning your equipment installation. This cable profile also reduces cross-talk and impedance to give a clearer, cleaner sound. The cable is finished in grey, with a marker on the positive wire to help with making connections to the speakers. Each cable has a 2-pin DIN plug (Male) at one end and bare stripped and tinned wires at the other end ready to solder into the Beovox 2500 Cube Tweeters.
These cables are ideal for the classic Beovox 2500 Cube Tweeters.
UPDATE: Save over 20% against our Summer 2008 prices! (5m cables were £14.99 per pair, 10m cables were £19.99 per pair) While stocks last!


