Beocord/Datalink compatible cable for Bang and Olufsen

This product is a high quality audiophile cable to allow you to connect your Bang and Olufsen Audio System to either a Beocord Cassette Recorder or to a Bang and Olufsen television using the "Aux" or "Tape" sockets. This cable will fit almost all B&O audio systems and TV's manufactured since 1990 (ie. those with Audio Link / Audio Aux. Link / DataLink sockets) - if you are in any doubt, please ask!

High quality, shielded plugs with metal inner cases are used on our cables in preference to the cheap plastic plugs that you will see on many other companies' cables. Our shielded plugs give better protection against induced electrical noise, which can degrade the sound quality produced. They are also far more rugged, to give you years of listening pleasure.

Cable specifications:-

  • * Screened High-Purity Copper cable with Black sheath
  • * Audio and Signal conductors: 7 x 0.1mm stranded copper
  • * Audio Screening conductors: 72 x 0.1mm stranded copper
  • * Data Screening conductor: 25 x 0.1mm stranded copper
  • * Black plastic cased 7-pin DIN plugs with metal inner case
  • * Overall Cable Diameter: 4mm
  • * "Data", "Audio In" and "Audio Out" signal wires connected for use with all Datalink compatible Beocords, B&O audio systems and B&O TV's

    Please note: Very few other companies' cables use shielded cable and plugs. Even fewer use high-purity, stranded copper for optimum signal quality. If other companies' listings don't state these specifications, then their cables usually don't come anywhere near our quality! If you've invested in a good quality audio system, then you need good cables to get the best from it. All of our cables are designed and tested by a Graduate Electronics Engineer with over 20 years experience of B&O equipment.

  •