Sounds Heavenly > Products for B&O > iPod/iPhone to Beolab Speakers Cables

iPod/TV to Beolab Speakers Cable

This product is a high quality Pure-Crystal Oxygen-Free Copper, audiophile cable to allow you to connect an iPod, iPad, iPhone, MP3 player, laptop, TV or any other device with a headphone socket directly to your Beolab active loudspeakers (models without displays), which will even work if you don't have a Bang and Olufsen hifi system or television. One cable will allow two Beolab speakers to be connected to one iPod or MP3 player. Versions of this cable are available that will fit almost all B&O Beolab active louspeakers (ie. those with RCA, DIN or 3.5mm Line input sockets) - if you are in any doubt, please ask! Turn the iPod volume down when you switch it on, as Beolab speakers are VERY powerful!

The "PAST MODELS" version of this cable is suitable for almost all of the discontinued range of Bang and Olufsen Beolab active loudspeakers, including:-

* Beolab 1

* Beolab 3000 - includes free 90 degree RCA adapters for easier fitting

* Beolab 4000 mk.1 (excluding Serial nos. 2xxxx onwards, up to late 2007 only)

* Beolab 4500 - includes free 90 degree RCA adapters for easier fitting

* Beolab 5000 - includes free 90 degree RCA adapters for easier fitting

* Beolab 6000

* Beolab 8000

* Beolab Penta

The "NEW MODELS" version of this cable is suitable for almost all of the current range of Bang and Olufsen Beolab active loudspeakers, including:-

* Beolab 3

* Beolab 4

* Beolab 5

* Beolab 9

* Beolab 11

* Beolab 4000 mk.2 (Serial nos. 2xxxx onwards, late 2007 onwards only)

* Beolab 6002 (late 2010 onwards only)

* Beolab 8002 (late 2010 onwards only)

Please note that whilst the "PAST MODELS" version of this cable can be used with older Beolab speakers that have displays (such as Beolab Penta speakers with RCA sockets for Line input), the displays will not function. If you want to connect your iPod to a B&O audio system or TV (ie. not directly to the speakers), please see our other listings for iPod to B&O cables, as these may be more suitable.

Cable specifications:-

* Double-Screened, Pure-Crystal Oxygen-Free Copper cable with Royal Blue sheath

* Signal conductors (x 2): 7 x 0.2mm PC-OFC copper

* Screening conductors (x2): 16 x 0.12mm PC-OFC copper

* Digital 24 carat Gold-Plated metal-bodied 3.5mm stereo jack plug

* 2 x 24 carat Gold-Plated metal-bodied RCA plugs ("PAST MODELS" version)

* 2 x Neutrik/Rean metal-cased 7-pin DIN plugs with gold plated pins ("NEW MODELS" version, not Beolab 4/5)

* 2 x Skytronic 24 carat Gold-Plated metal-cased 3.5mm jack plugs ("NEW MODELS" version, Beolab 4 only)

* 2 x 24 carat Gold-Plated metal-bodied RCA plugs ("NEW MODELS" version, Beolab 5 only)

* 1 x Neutrik/Rean metal-cased 7-pin DIN plug with gold plated pins ("NEW MODELS" version, Beolab 11 only)

What's so special about our cables?

Sounds Heavenly use high quality, fully shielded cables with spiral wrapped screening conductors to prevent unwanted electrical noise from interfering with your music. We build our cables with pure-crystal, oxygen-free copper wiring, which provides deep bass notes and clear treble for accurate stereo imaging and a pure, lifelike sound. The strong metal-cased connectors on our cables have gold or silver contacts for optimum signal transfer and a long life. Our cables provide superb sound quality, whilst having a discreet profile to help you hide wiring unobtrusively around your home.