iPod/iPad/iPhone/MP3 to B&O BeoVision OFC cable
This product is a high quality audiophile cable to allow you to connect your iPod, iPad, iPhone, PC or MP3 player (or any audio device with a 3.5mm headphone/line output socket) into your Bang and Olufsen BeoVision television using the Aux or Aux1 socket. This will fit almost all B&O televisions manufactured between around 1970 and 1990 (ie. those with a 7 pin DIN "Audio Aux Link" or "Aux/Line" socket fitted) - if you are in any doubt, please ask!
This cable is also suitable for RECORDING FROM a B&O audio system TO a PC or portable audio recorder. However, if you want to play back music from an external device to a B&O audio system, please click on the "B&O Cables" button above to go to our main B&O products page for cables to connect an iPod or PC into your B&O audio system (eg. BeoSound/BeoMaster/BeoCenter, etc).
High quality, premium branded, metal-cased plugs are used on our cables in preference to the cheap plastic plugs that you will see on many other companies' cables. Our metal cased plugs give better protection against induced electrical noise, which can degrade the sound quality produced. They are also far more rugged, to give you years of listening pleasure. We also use premium quality, gold-plated 3.5mm jack plugs and professional Neutrik DIN plugs with gold plated pins on our cables, for the ultimate in quality sound reproduction!
Slimline, audiophile-quality Oxygen-Free Copper screened cabling is used in our cables, to ensure unrivalled sound quality, to prevent interference and to allow you to easily hide wiring when planning your equipment installation. This also reduces cross-talk and impedance to give a clearer, cleaner sound. The cable is finished in a dark Royal Blue colour.
If using a Beolink 1000 remote control, simply press "AV" and then "CD" to activate the external audio input. If using a Beo4 remote control, press "List" until "AV" appears on the screen, then press "CD" to activate the external audio input. If you have an older "LX" series TV that was originally provided with a Beolink Video remote control and you are now using a Beolink 1000, just press "SHIFT", "SHIFT" and then "TV" (pressing "SHIFT" on Beolink 1000 is equivalent to the "AUX" button on the Beolink Video Terminal).
Cable specifications:-
Please note: Very few other companies' cables use branded cable and plugs. Even fewer use Oxygen-Free Copper for optimum signal quality and hardly any others include a foil screen to shield the cable from interference. If other companies' listings don't state these specifications, then their cables usually don't come anywhere near our quality! If you've invested in a good quality audio system, then you need good cables to get the best from it. All our cables are designed and tested by a Graduate Electronics Engineer with over 20 years experience of B&O equipment.
For best results, you will normally need to set the volume control on your MP3 player near to maximum when it is connected to a television. This is due to the low signal level produced by portable music players. This cable sends audio signals only, so it will not transmit pictures to your television.


