Welcome to Sounds Heavenly!

Products for Bang and Olufsen Systems

Sounds Heavenly are pleased to offer you a wide range of cables and accessories to complement your Bang and Olufsen audio system. All of our products are designed and tested by the company founder, a graduate Electronics Engineer with over 20 years' experience of professional and high-end domestic audio systems. Sounds Heavenly are proud to offer FREE Worldwide shipping on all of our cables! Please feel free to email us with any enquiries!

PC/iPod/TV to B&O Beolab 3/9/4000 mk.2 Cable

This product is a high quality, Pure-Crystal Oxygen-Free Copper, audiophile cable to allow you to connect a PC, iPod, iPad, iPhone, MP3 player, laptop, TV or any other device with a headphone socket directly to your Beolab 3, Beolab 9 or Beolab 4000 mark 2 (ICEPower) active loudspeakers, which will even work if you don't have a Bang and Olufsen hifi system or television. One cable will allow two Beolab speakers to be connected to one iPod or MP3 player. This cable will fit the Beolab 3, 9 and 4000 mk.2 active louspeakers (ie. those WITHOUT RCA Line input sockets) - if you are in any doubt, please ask!

High quality, shielded plugs with metal cases are used on our cables in preference to the cheap plastic plugs that you will see on many other companies' cables. Our shielded plugs give better protection against induced electrical noise, which can degrade the sound quality produced. They are also far more rugged, to give you years of listening pleasure. This cable uses Directional, Pure Oxygen-Free Copper conductors for clear sound quality and gold-plated 3.5mm jack plugs and professional Neutrik DIN plugs with gold plated pins for a perfect connection every time. The 7 pin DIN plugs also include a voltage reference pin to prevent mains interference occuring. Just set the input switch on the back of your Beolab speakers to "Line" and plug the cable into the round Powerlink socket on the back of each speaker. Turn the iPod volume down when you switch it on, as Beolab speakers are VERY powerful!

This cable is suitable the following models from the current range of Bang and Olufsen Beolab active loudspeakers:-

  • * Beolab 3
  • * Beolab 9
  • * Beolab 4000 mk.2 (Serial no. 2xxxx onwards, from late 2007)

    If you want to connect your iPod to a B&O audio system or TV (ie. not directly to the speakers), please see our other listings for iPod to B&O cables, as these may be more suitable.

    Cable specifications:-

  • * Double-Screened, Pure-Crystal Oxygen-Free Copper cable with Royal Blue sheath (1m lengths) and Grey or Black sheath (longer lengths)
  • * Signal conductors (x 2): 7 x 0.2mm PC-OFC copper
  • * Screening conductors (x2): 16 x 0.12mm PC-OFC copper
  • * 2 x Neutrik metal-cased 7-pin DIN plugs with gold plated pins
  • * Skytronic or Digital 24 carat Gold-Plated metal-bodied 3.5mm stereo jack plug

    Please note: Very few other companies' cables use metal cased, shielded plugs with 24 carat gold contacts. Even fewer use high-purity, stranded Oxygen-Free Copper for optimum signal quality. If other companies' listings don't state these specifications, then their cables usually don't come anywhere near our quality! If you've invested in a good quality audio system, then you need good cables to get the best from it. All of our cables are selected by a Graduate Electronics Engineer with over 20 years experience of B&O equipment.

    •