Welcome to Sounds Heavenly!

Products for Bang and Olufsen Systems

Sounds Heavenly are pleased to offer you a wide range of cables and accessories to complement your Bang and Olufsen audio system. All of our products are designed and tested by the company founder, a graduate Electronics Engineer with over 20 years' experience of professional and high-end domestic audio systems. Sounds Heavenly are proud to offer FREE Worldwide shipping on all of our cables! Please feel free to email us with any enquiries!

PC/iPod/TV to Bang and Olufsen Beolab 4 OFC Cable

This product is a high quality Pure-Crystal Oxygen-Free Copper, audiophile cable to allow you to connect a PC, iPod, iPad, iPhone, MP3 player, laptop, TV or any other device with a headphone socket directly to your Beolab 4 active loudspeakers, which will even work if you don't have a Bang and Olufsen hi-fi system or television. One cable will allow two Beolab speakers to be connected to one iPod or MP3 player. This cable will fit the Beolab 4 active louspeakers (ie. those WITHOUT RCA Line input sockets) - if you are in any doubt, please ask!

High quality, shielded plugs with metal cases are used on our cables in preference to the cheap plastic plugs that you will see on many other companies' cables. Our shielded plugs give better protection against induced electrical noise, which can degrade the sound quality produced. They are also far more rugged, to give you years of listening pleasure. This cable uses Directional, Pure Oxygen-Free Copper conductors for clear sound quality and gold or nickel-plated 3.5mm jack plugs for a perfect connection every time. Just set the input switch on the back of your Beolab speakers to "Line" and plug the cable into the small round Line input socket on the back of each speaker (the right audio plug is marked by a red band around the cable near the plug). Turn the iPod volume down when you switch it on, as Beolab speakers are VERY powerful!

This cable is suitable the following models from the current range of Bang and Olufsen Beolab active loudspeakers:-

  • * Beolab 4

    If you want to connect your iPod to a B&O audio system or TV (ie. not directly to the speakers), please see our other listings for iPod to B&O cables, as these may be more suitable.

    Cable specifications:-

  • * Double-Screened, Pure-Crystal Oxygen-Free Copper cable with Royal Blue sheath (1m lengths) and Grey or Black sheath (longer lengths)
  • * Signal conductors (x 2): 7 x 0.2mm PC-OFC copper
  • * Screening conductors (x2): 16 x 0.12mm PC-OFC copper
  • * Shielding: Foil screen to reduce interference
  • * 2 x Neutrik or Deltron 24 carat Gold-Plated metal-cased 3.5mm jack plugs
  • * Skytronic or Digital 24 carat Gold-Plated metal-bodied 3.5mm stereo jack plug

    Please note: Very few other companies' cables use metal cased, shielded plugs. Even fewer use high-purity, stranded Oxygen-Free Copper for optimum signal quality. If other companies' listings don't state these specifications, then their cables usually don't come anywhere near our quality! If you've invested in a good quality audio system, then you need good cables to get the best from it. All of our cables are selected by a Graduate Electronics Engineer with over 20 years experience of B&O equipment.

    •