Welcome to Sounds Heavenly!

Products for Bang and Olufsen Systems

Sounds Heavenly are pleased to offer you a wide range of cables and accessories to complement your Bang and Olufsen audio system. All of our products are designed and tested by the company founder, a graduate Electronics Engineer with over 20 years' experience of professional and high-end domestic audio systems. Sounds Heavenly are proud to offer FREE Worldwide shipping on all of our cables! Please feel free to email us with any enquiries!

B&O Powerlink to Quad 303/405 Power Amp Cable

This product is a high quality audiophile cable to allow you to connect a classic Quad 303, 405 or 405-2 power amplifier and conventional passive loudspeakers to your active Bang and Olufsen hifi system using the Powerlink outputs, where the Quad power amplifier has a 4 pin DIN input socket fitted. You will then be able to use your B&O system or B&O remote control to control the level of the loudspeakers. This cable uses premium quality, metal cased DIN plugs with black plastic outer covers and will fit almost all B&O audio systems manufactured since 1990 - if you are in any doubt, please ask!

We are particularly proud of this cable, which we consider to be a neat solution to allow you to integrate your B&O system with a conventional Quad hifi system, whilst keeping control at your fingertips with your B&O remote. Many Bang and Olufsen dealers will tell you that this can't be done - but we can prove them wrong!

High quality, premium branded, metal-cased plugs with plastic outer covers are used on our cables in preference to the cheap plastic plugs that you will see on many other companies' cables. Our metal screened plugs give better protection against induced electrical noise, which can degrade the sound quality produced. They are also far more rugged, to give you years of listening pleasure.

Slimline, audiophile-quality high purity copper twin-screened cabling is used in our cables, to ensure unrivalled sound quality, to prevent interference and to allow you to easily hide wiring when planning your equipment installation. This also reduces cross-talk and impedance to give a clearer, cleaner sound. The cable is finished in a Black colour.

Cable specifications:-

  • * Twin Screened High Purity Copper cable with Black sheath
  • * Signal conductors (x 2): 7 x 0.2mm high-purity copper
  • * Screening conductors (x 2): 16 x 0.12mm high-purity copper
  • * Deltron metal-bodied 4 and 8-pin DIN plugs with black plastic outer covers

    Please note: Very few other companies' cables use branded cable and plugs. Even fewer use high purity Copper for optimum signal quality. If other companies' listings don't state these specifications, then their cables usually don't come anywhere near our quality! If you've invested in a good quality audio system, then you need good cables to get the best from it. All cables are designed and tested by a Graduate Electronics Engineer with over 20 years experience of B&O equipment.

    •