Welcome to Sounds Heavenly!

Products for Bang and Olufsen Systems

Sounds Heavenly are pleased to offer you a wide range of cables and accessories to complement your Bang and Olufsen audio system. All of our products are designed and tested by the company founder, a graduate Electronics Engineer with over 20 years' experience of professional and high-end domestic audio systems. Sounds Heavenly are proud to offer FREE Worldwide shipping on all of our cables! Please feel free to email us with any enquiries!

Powerlink compatible "Y" Splitter/Doubler for B&O

This product is a high quality audiophile cable to allow you to connect two Beolab active loudspeakers to a single Powerlink socket on your Bang and Olufsen hifi system or television. This cable will fit almost all B&O audio systems and TV's manufactured since 1990 (ie. those with Powerlink output sockets) - if you are in any doubt, please ask!

This cable is especially useful when using BeoSound 4 or Beolab 3, Beolab 4 or Beolab 8000 speakers, as these items each have only one Powerlink socket, making it difficult to connect additional speakers. When BeoSound 4 is used with the speakers listed above, this cable becomes essential! As both left and right audio signals are present in each Powerlink socket, only one adapter cable is need to connect both left and right speakers to one Powerlink socket.

High quality, shielded plugs with metal inner cases are used on our cables in preference to the cheap plastic plugs that you will see on many other companies' cables. Our shielded plugs give better protection against induced electrical noise, which can degrade the sound quality produced. They are also far more rugged, to give you years of listening pleasure.

This 0.2m cable is fully-wired, making it suitable for ALL Beolab speakers with 8 pin Powerlink sockets, ie. all of the current range of Bang and Olufsen Beolab active loudspeakers and past models, including:-

  • * Beolab 1
  • * Beolab 2
  • * Beolab 3
  • * Beolab 4
  • * Beolab 7.1
  • * Beolab 7.2
  • * Beolab 9
  • * Beolab 10
  • * Beolab 2500
  • * Beolab 4000
  • * Beolab 6000
  • * Beolab 8000

    This cable is also ideal for older Beolab speakers that have displays (such as Beolab 3000, 3500, 4500, 5000 and Penta), as this is fully wired with mark 2 Powerlink compatible cable to allow the displays to function correctly.

    Cable specifications:-

  • * 0.2m long Screened High-Purity Copper cable with Black sheath
  • * Audio and Signal conductors: 7 x 0.1mm stranded copper
  • * Screening conductor: 72 x 0.1mm stranded copper
  • * Black plastic cased 8-pin DIN plug with metal inner case (factory sealed on 0.2m cables)
  • * Black plastic cased 8-pin DIN line sockets with metal inner case (x2) (factory sealed on 0.2m cables)
  • * Overall Cable Diameter: 4.5mm
  • * 0.2m cables are fully wired with mk.2 Powerlink compatible cable, for use will all Powerlink equipped speakers.

    Please note: Very few other companies' cables use shielded cable and plugs. Even fewer use high-purity, stranded copper for optimum signal quality. If other companies' listings don't state these specifications, then their cables usually don't come anywhere near our quality! If you've invested in a good quality audio system, then you need good cables to get the best from it. All of our cables are designed and tested by a Graduate Electronics Engineer with over 20 years experience of B&O equipment.

    •