Sounds Heavenly > Products for B&O > Line Input Cables for Beolab Speakers

Stereo pair of RCA Pre-Out to Beolab Line In Cables

This product is a professional quality, audiophile stereo interconnect cable to allow you to connect from a non-B&O AV processor or pre-amplifier with variable volume pre-out sockets directly to your B&O Beolab active speakers, where the processor uses the industry-standard RCA plugs (also known as Phono or Cinch plugs).

This cable is suitable for most of the current range of Bang and Olufsen Beolab active loudspeakers and many past models, including:-

* Beolab 1 - Choose "Beolab (RCA)" option

* Beolab 3

* Beolab 4

* Beolab 5 - Choose "Beolab (RCA)" option

* Beolab 9

* Beolab 11 Subwoofer

* Beolab 3000 - includes free 90 degree RCA adapters for easier fitting

* Beolab 4000 - For mk.1 speakers, choose "Beolab (RCA)" option

* Beolab 4500 - includes free 90 degree RCA adapters for easier fitting

* Beolab 5000 - includes free 90 degree RCA adapters for easier fitting

* Beolab 6000 - Choose "Beolab (RCA)" option

* Beolab 6002

* Beolab 8000 - Choose "Beolab (RCA)" option

* Beolab 8002

* Beolab Penta - Choose "Beolab (RCA)" option

It can be used with older Beolab speakers that have displays (such as Beolab 3000, 4500, 5000 and Penta), but the displays will not function.

Versions of this cable can be supplied to connect to Beolab speakers with special Line input connections, eg. Beolab 3, 9 and 4000 mark 2 by selecting the appropriate option on the left of the page. Please note that this cable is NOT suitable for speakers that do not have a Line input option, eg. Beolabs 2500, 2, 7.1, 7.2, 7.4 and 10.

Important note: This cable is for connection to AV processors and pre-amplifiers only. If you wish to connect Beolab speakers to an integrated amplifier or power amplifier, please use our Attenuated Cables to avoid damaging the speakers. If you are in any doubt, please ask!

Cable specifications:-

* Twin-Screened Oxygen-Free Copper cable with royal blue sheath (made by Digital)

* Gold-Plated metal-bodied RCA (phono) plugs

* Neutrik/Rean TRS or 7pin DIN plugs (x2) (for Beolab 3, 4, 9 and 4000 mark 2 only)

What's so special about our cables?

Sounds Heavenly use high quality, fully shielded cables with spiral wrapped screening conductors to prevent unwanted electrical noise from interfering with your music. We build our cables with pure-crystal, oxygen-free copper wiring, which provides deep bass notes and clear treble for accurate stereo imaging and a pure, lifelike sound. The strong metal-cased connectors on our cables have gold or silver contacts for optimum signal transfer and a long life. Our cables provide superb sound quality, whilst having a discreet profile to help you hide wiring unobtrusively around your home.