Welcome to Sounds Heavenly!

Products for Naim, Quad, Meridian and Audiolab Systems

Sounds Heavenly are pleased to offer you a wide range of cables and accessories to complement your Naim, Quad, Meridian or Audiolab system. All of our products are designed and tested by the company founder, a graduate Electronics Engineer with over 20 years' experience of professional and high-end domestic audio systems. Sounds Heavenly are proud to offer FREE Worldwide shipping on all of our cables! Please feel free to email us with any enquiries!

Naim/Quad/Classic Hifi 5pin DIN to 5pin DIN Cable

This product is a high quality audiophile cable to allow you to connect a Naim/Quad/Audiolab/Meridian or similar Tuner, CD or DVD player (or any other similar line-level source) into your Naim, Quad, Audiolab, A&R, Leak or Meridian hifi system using a Line In socket, where the CD/DVD player has a 180 degree 5pin DIN output socket. It can also be used to connect a Turntable with a 5pin DIN output socket to your Naim, Quad, Audiolab, A&R, Leak or Meridian system, as long as you have a Phono Pre-Amplifier to boost the signal up to line level. This cable uses premium quality, branded DIN plugs with gold-plated contacts and will fit almost all Naim, Quad, Audiolab, A&R, Leak and Meridian amplifiers, including those listed below. If you are in any doubt, please ask!

This popular cable is primarily purchased to connect a Quad Tuner (eg. FM3) into a Quad pre-amp (eg. 33 or 44), but it has many possible applications. Please contact us if you need advice on whether this cable is suitable for your equipment.

Compatible Naim pre-amplifiers:-

  • * All models with 5-pin DIN sockets, including: NAC112, NAC 122, NAC 202, NAC 252, NAC 282 NAC 552 and many others!

    Compatible Quad pre-amplifiers:-

  • * All models with 5-pin DIN sockets!

    Compatible Naim integrated amps:-

  • * All models with 5-pin DIN sockets, including NAIT 55, NAIT 55i, AV2, SUPERNAIT and many others!

    Compatible Meridian amplifiers:-

  • * All models with 5-pin DIN sockets, including 101 and many more!

    Compatible Audiolab amplifiers:-

  • * All models with 5-pin DIN sockets, including 8000A and many others!

    Compatible A&R amplifiers:-

  • * All models with 5-pin DIN sockets!

    Compatible Leak amplifiers:-

  • * All models with 5-pin DIN sockets!

    High quality, premium branded, metal-cased plugs are used on our cables in preference to the cheap plastic plugs that you will see on many other companies' cables. Our metal cased plugs give better protection against induced electrical noise, which can degrade the sound quality produced. They are also far more rugged, to give you years of listening pleasure. We also use premium quality DIN plugs with silver-plated contacts on our cables, for the ultimate in quality sound reproduction!

    Slimline, audiophile-quality, high-purity copper twin-screened cabling is used in our cables, to ensure unrivalled sound quality, to prevent interference and to allow you to easily hide wiring when planning your equipment installation. This also reduces cross-talk and impedance to give a clearer, cleaner sound. The cable is finished in a Black coloured outer sheath.

    Cable specifications:-

  • * Twin-screened high-purity Copper cable with Black outer sheath
  • * Signal conductors (x 2): 7 x 0.2mm copper
  • * Screening conductors (x 2): 16 x 0.12mm copper
  • * Neutrik nickel-plated brass 5-pin DIN plugs with gold plated pins (x2)

    Please note: Very few other companies' cables use branded cable and plugs. Even fewer use high-purity Copper for optimum signal quality. If other companies' listings don't state these specifications, then their cables usually don't come anywhere near our quality! If you've invested in a good quality audio system, then you need good cables to get the best from it. All our cables are designed and tested by a Graduate Electronics Engineer with over 20 years experience of hi-end audio equipment.

    •